1. #1
    Unregistered

    Minimum required percentage in B.Tech to appear in Indian Engineering Services exam?

    B.tech cutoff % for IES
    sir, what is the minimum percentage required in B.Tech to appear for Indian engineering services examination?

  2. #2
    Kunalroy89 Array
    Join Date
    Mar 2013
    Posts
    436

    Re: Minimum required percentage in B.Tech to appear in Indian Engineering Services exam?

    There is no minimum percentage required for applying in IES.
    You can apply if you have passed or in Final year of B.tech.The age limit is 21-30years for general category,21-33 for OBC and 21-35 for SC/ST.
    The marks does not matter for being eligible but good marks will definitely help during interview.

  3. #3
    Venkat fias Array
    Join Date
    Jul 2013
    Posts
    112

    Re: Minimum required percentage in B.Tech to appear in Indian Engineering Services exam?

    You scored 50% of marks in your degree level course, you are eligible in IES exam.

  4. #4
    beniwal Array
    Join Date
    Mar 2013
    Posts
    788

    Re: Minimum required percentage in B.Tech to appear in Indian Engineering Services exam?

    Hi,
    It is nice that you want to join IES exam which is conducted by UPSC.

    There is no percentage Requirement to join IES exam.

    You must be passed a engineering degree from a Recognized university.

    There is specifics age limit for IES exam.


    Age limit for IES exam is 21-30 years.

    There is age relaxation for Reserved category candidates.

    You must be citizen of India.

    You have to clear Preliminary exam, Mains exam and Interview to become IES officer.

    Therefore start preparation for ies exam because this year Preliminary exam is over.

    You have to wait for next year notification.

    For more information, you can visit the official website.

    All the best.................


  5. #5
    aashisranjan784 Array
    Join Date
    Aug 2012
    Posts
    1,313

    Re: Minimum required percentage in B.Tech to appear in Indian Engineering Services exam?

    Dear Friend


    Indian Engineering services or also called Engineering services exam .One of the most suitable UPSC exams for the engineers conducted once every year.

    The eligibility criteria for the IES is as below:

    1.You must have done bachelor's degree in engineering or technology from a recognized university .Candidates having master's degree in physics ,science or mathematics can also apply for the exam.

    >>The best thing about the UPSC exam is that it just requires passing % of marks in the examination which makes you eligible for the entrance exam .There is no such defined cut off ,only passing % of marks is required.

    >>But you should aim to secure as much as possible as it will show your good academic performance.

    >>Candidates belonging to any category can give exam in only four streams:

    1.Civil engineering

    2.Mechanical engineering

    3.Electrical engineering

    4.Electronics and Communication engineering

    2.The age limit is as below:

    General category candidates :21-30 years

    OBC :21-33 years

    SC/ST 21-35 years.

    3.Nationality : Indian citizenship is mandatory.

    4.Examination pattern:


    5.Important dates for the IES 2014:

    Date of notification:15/03/2014

    Last date of receiving application:14/04/2014

    Date of written test:20/06/2014

    >>You can apply at www.upsconlinenic.in
    For any more details please visit www.upsc.gov.in

    Hope the information helps you.If you have any more query you can leave your message here .

    All the best for your career.

    aashisranjan784

  6. #6
    end of query Array
    Join Date
    Mar 2013
    Posts
    655

    Re: Minimum required percentage in B.Tech to appear in Indian Engineering Services exam?

    Hi
    There is no requirement of any kind of specified percentage required in your under graduation for giving the indian engineering services examination.
    For giving the exam, you need to fulfill the following eligibility criteria which states that you should be a graduate in any stream of engineering mentioned below.
    Electrical/mechanical/ECE/ civil engineering.
    And the age criteria for giving the exam is that your age should not be less than 21 years of age.
    However the maximum age limit is different for different categories
    For general= 30 years
    For obc= 33 years
    For sc/st= 35 years

  7. #7
    niks7 Array
    Join Date
    May 2013
    Posts
    386

    Re: Minimum required percentage in B.Tech to appear in Indian Engineering Services exam?

    Dear Aspirant

    Indian Engineering Services examination is conducted by UPSC for recruitment of engineers.They are mainly selected in different fields of engineering like Civil,Mechanical,Electrical and E&TC.The minimum percentage required in order to apply for the examination is 60% with no backlogs.

    Besides this keep in mind that your age limits should be minimum of 21 years.Also keep in mind that you can attempt paper only in these four branch of engineering.They are ELectrical,Civil,Mechanical and E&TC.The examination is conducted in both conventional and objective type question papers

  8. #8
    vickydoner Array
    Join Date
    Mar 2013
    Posts
    137

    Re: Minimum required percentage in B.Tech to appear in Indian Engineering Services exam?

    Hey

    There is no minimum percentage required in the engineering for the IES exam.
    You can apply for the IES exam if you have passed the engineering degree from any of the following streams:-

    --Mechanical engineering
    --Electrical
    --Electronics and communication
    --Civil engineering

    your degree must be from a recognized university.
    Your age must be lies in between 21-30 years.
    age relaxation is also given to the reserved category candidates.
    Yo must be Indian.

    So you are eligible for IES after completion of engineering.

    for more :- http://www.upsc.gov.in



  9. #9
    amitkumarsingh Array
    Join Date
    Aug 2013
    Posts
    37

    Re: Minimum required percentage in B.Tech to appear in Indian Engineering Services exam?

    dear friends
    As you all know that IES stands for INDIAN ENINEERING SERVICES which does not have any percentage criteria for entrance exam but there are few qualification required for the entrance exam such as
    *the candidate must hace complited it's B.Tech/B.E from the reputed registered college or university.
    *the candidate who are in there final year of degree can also apply for the exam.
    *age limit is 22-30.
    *the candidate must be
    -citizen of Indian
    -a subject of Bhutan
    -a subject of Nepal
    Hope the provided information is sufficiant for the candidate in achieving their goal..
    *****GOOD LUCK*****

  10. #10
    sah.alok Array
    Join Date
    Dec 2012
    Posts
    806

    Re: Minimum required percentage in B.Tech to appear in Indian Engineering Services exam?

    Hello

    No percentage is required for applying in Indian Engineering Services Exams.

    Only a degree in engineering in any discipline,with only pass marks.No percentage necessary.

    IES conducted by UPSC and have no percentage issues at all.

    Selection Pattern
    1)Written part

    objective part
    conventional part.

    2)Interview part
    personality test part.

    IES exam have no connection with civil service,CSAT exams.
    IES officers are posted in four major branches of engineering

    1)Mechanical Engineering
    2)Electronics and Communication Engineering
    3)Civil Engineering
    4)Electrical Engineering

  11. #11
    cool Array
    Join Date
    Nov 2012
    Posts
    733

    Re: Minimum required percentage in B.Tech to appear in Indian Engineering Services exam?

    Hello my Dear Friend ...


    NO need to Worry

    I think it is a Good news for you

    You need not struggle with the " Percentage " issue

    Because there is no percentage criteria at all


    To be eligible for I.E.S you must passed the BACHELOR IN ENGINEERING / TECHNOLOGY

    So the main thing is this

    No matter .. how must you get the Percentage ...


    You must not have any Backlogs

    And the minimum age could be " 21 " years

    Maximum age is allowed up to " 30 " years

    Of course there is a relaxation in age for the reserved candidates

    You can Of course apply for it



    ALL THE GOOD LUCK

  12. #12
    Yashjp Soni Array
    Join Date
    Jul 2013
    Posts
    216

    Re: Minimum required percentage in B.Tech to appear in Indian Engineering Services exam?

    Friend, there is no minimum percentage requirement in attempting IES exam. The age limit for IES exam is 21-30 years.

  13. #13
    Venkat Ganesan Array
    Join Date
    Jul 2013
    Posts
    76

    Re: Minimum required percentage in B.Tech to appear in Indian Engineering Services exam?

    You have scored 60% in your degree level courses you are eligible in IES exam.
    Eligibility :
    Candidate must complete thease branches
    @ Civil,
    @ Mechanical,
    @ Electronic,
    @ Electrical,
    Candidate must on indian citizen.
    Age between on 21---30.
    3 years relaxation on BC/MBCs.
    5 years relaxation on SC/STs.
    10 years relaxation on physical ability candidates.

  14. #14
    Superstar Array
    Join Date
    Sep 2012
    Posts
    311

    Re: Minimum required percentage in B.Tech to appear in Indian Engineering Services exam?


    • IES stands for indian engineering services. Upsc conducts this examination every Year.
    • You must have completed the graduation in any engineering field from recognised university.
    • But you can apply in any of the below engineering field which are Civil engineering, Mechanical engineering, Electrical engineering, Electronics and Communication engineering.
    • The lower age limit stated for it is 21 years to upper age limit prescribed for it is 30 years.
    • If you are from reserved category, then relaxations in upper age limit is provided.

  15. #15
    RSJ Array
    Join Date
    Oct 2012
    Posts
    592

    Re: Minimum required percentage in B.Tech to appear in Indian Engineering Services exam?

    Friend, Please note that there is no need of any fixed marks or percentage in engineering degree in order to be eligible for Indian Engineering Service Examination. Only possession of engineering degree will make you eligible for IES Examination. Only pass marks in engineering degree are quite sufficient.

    Candidates are required that they must have engineering degree in following disciplines mentioned below;

    # Mechanical engineering
    # Electrical
    # Electronics and communication
    # Civil engineering


    Age limit required here is as follows:

    * 21-30 years for Unreserved category
    * 21-33 years for OBC category
    * 21-35 years for SC/ST category
    * 21-40 years for PWD category

  16. #16
    prince Array
    Join Date
    Jul 2012
    Location
    BANSWARA
    Posts
    858

    Re: Minimum required percentage in B.Tech to appear in Indian Engineering Services exam?


    Hello friend,


    first of all i advised you to not to believe on rumors and also should not spread it out, if you have any doubt about any thing than you should get suggestions and advice to a counselor or your elders and not to believe on local knowledge ,

    this type of rumors are spread because of its toughness ,but that doesn't mean that it has requirement of any special percentage.

    there is no any percentage criteria in INDIAN ENGINEERING SERVICES.

    but yes there is a restriction in examination that the candidates have to give the examination in one of the four branches.

    the branches are.

    1. electrical engineering.

    2. electronics and telecommunication engineering.

    3. civil engineering.

    4. mechanical engineering.



    so you are advised to prepare your self for any of these branches if you wish to apply for the same and to become a govt. engineer.

    other qualification requirements are as same as for other upsc examination like.

    age criteria:-

    1. must be in between 21-30 years.

    2. 3 yrs age relaxation for obc category.

    3. five yrs age relaxation for sc/st category .


    and also the no of attempts.

    1. for general category-4 attempts.

    2. for obc category-7 attempts.

    3. for sc/st category-no limit.


    so start prepare yourself , as there is no any percentage criteria ,so it doesn't matter whatever percentage you have in your engineering , only knowledge matters here.


    good luck .










  17. #17
    k.jeba singh Array
    Join Date
    Aug 2013
    Posts
    50

    Re: Minimum required percentage in B.Tech to appear in Indian Engineering Services exam?

    There is no minimum precentage in Indian engineering service.only pass in engineering degree.this exam is conducted in upsc.there are eligible in four branchs there are mechanical engineering,civil engineering,electrical and electronic engineering,electronic and communication engineering.

  18. #18
    chubul pandey Array
    Join Date
    Jul 2013
    Posts
    25

    Re: Minimum required percentage in B.Tech to appear in Indian Engineering Services exam?

    DEAR FRIEND


    DON'T WORRY THERE IS NO PERCENTAGE CRITERIA FOR INDIAN ENGINEERING

    SERVICES & ANY UPSC EXAM BUT YOU MUST BE A PASSED CANDIDATE WITH ANY
    STREAM IN B.TECH/ BE . BUT YOU CAN WRITE PAPER IN ANY ONE OF THESE .

    1. CIVIL ENGINEERING

    2. MECHANICAL ENGINEERING

    3. ELECTRICAL ENGINEERING

    4. ELECTRONIC & TELECOMMUNICATION


    QUALIFICATION FOR INDIAN ENGINEERING SERVICES -:

    * You must be an Indian .

    * You must be graduate with any stream in B.tech / BE

    AGE CRITERIA-:

    * For general aspirant -: 21-30 yrs

    * For OBC aspirant -: 21-33 yrs

    * For sc/st aspirant -: 21- 35 yrs


    NO . OF ATTEMPTS -:

    * GENERAL -: 4 times

    * OBC -: 7 times

    * SC/ST -: no limits


    RELAXATION -:

    * There is 5 yrs old age relaxation for government servant.

    * There is 10 yrs old age relaxation for physically handicapped.


    For more information visit -: http://www.upsc.gov.in


    @ GOOD LUCK @

  19. #19
    megh@ Array
    Join Date
    Dec 2012
    Posts
    98

    Re: Minimum required percentage in B.Tech to appear in Indian Engineering Services exam?

    Quote Originally Posted by Unregistered View Post
    B.tech cutoff % for IES
    sir, what is the minimum percentage required in B.Tech to appear for Indian engineering services examination?
    Dear Friend,
    There is no minimum marks needed for the IES exam.

    Infact there is no needed for the any percentage in any of the UPSC exams.

    ELIGIBILITY CRITERIA FOR IES:-

    ><Should have a B.Tech/B.E degree in any stream.

    ><There is no minimum marks needed.

    ><Age of the candidates should be 21-30 years.

    ><SC/ST candidates are given age relaxation of 5 years and OBC candidates of 3 years.

    ><Should be Indian citizen.

    http://www.upsc.gov.in

  20. #20
    er.animesh6 Array
    Join Date
    May 2013
    Posts
    114

    Re: Minimum required percentage in B.Tech to appear in Indian Engineering Services exam?

    Hello Friend,

    There is no minimum marks required in B.Tech in order to eligible for IES examination.

    All you need to qualify for IES is
    1. Candidate who finished 4 years B.E/B.Tech in Electronics and Telecommunication Engineering(ECE), Mechanical Engineering(ME),Civil Engineering(CE), Electrical Engineering(EE) from any government recognized University.

    2. Candidate who are in final year of B.E/B.Tech are also eligible for IES.

    3. Age of the candidate must be within 21 to 30 years on or before 1st August. Age relaxation will be given for SC/ST/OBC candidate as per central government rules.

    4. Only Indians can apply for IES examination. No other candidates are allowed for this examination.

    5. General candidate can appear at most 4 times in IES while for OBC candidates they can appear for 7 times but no restriction for SC/ST candidates.

    Wish you all the best.

  21. #21
    Rock divyanshu Array
    Join Date
    Dec 2012
    Posts
    667

    Re: Minimum required percentage in B.Tech to appear in Indian Engineering Services exam?

    Dear Friend,

    For Indian Engineering Services Examination no percentage barrier , those candidates are also eligible which just have passing marks in engineering graduation.

    Educational Requirements :-

    Candidate should be graduate in engineering and also can apply in last year of graduation.

    Age Limit :-

    Candidate must be under 21-30 years.

    Nationality :-

    Candidate should be Indian.

    For More Details :-

    http://www.upsc.gov.in

    Good Luck....

  22. #22
    Rekha351 Array
    Join Date
    Aug 2013
    Posts
    111

    Re: Minimum required percentage in B.Tech to appear in Indian Engineering Services exam?

    IES means American Indian executive services. Upsc conducts this kind of examination every single Year.
    You will need concluded the actual university in a executive area via recognized university.
    However, you can put most of the below executive area which might be Civil executive, Mechanised executive, Electro-mechanical executive, Electronic devices along with Connection engineering.
    The bottom age minimize expressed for this will be 21 ages to help uppr age minimize prescribed by doctors for this will be 30 years.
    If you're via appropriated type, next relaxations inside uppr age minimize will be provided.Indian Executive Services examination is carried out by simply UPSC with regard to recruiting of engineers.They are generally decided on in different job areas of executive just like Civil,Mechanised,Electro-mechanical along with E&TC.The minimum amount portion needed in sequence to apply for the actual examination will be 60% without having backlogs.

    In addition to this kind of understand that you're limitations ought to be minimum of 21 years.Also understand that you can try report exclusively through these 4 office of engineering.They tend to be ELectrical,Civil,Mechanised along with E&TC.The examination is carried out in the standard along with objective kind dilemma papers.

  23. #23
    ajaygupta123 Array
    Join Date
    Sep 2012
    Posts
    158

    Re: Minimum required percentage in B.Tech to appear in Indian Engineering Services exam?

    You just need to pass B.Tech in order to become eligible for Indian Engineering Services Examination. UPSC hasn't mentioned any particular percentage that you have to get to become eligible for the exam.

    So don't worry if you have got less marks in Engineering Graduation and concentrate on the preparation for the exam so that you can succeed in it.

    The Engineering Officers are recruited in following services:

    -Civil Engineering Services

    -Mechanical Engineering Services

    -Electronics Engineering Services

    -Electrical Engineering Services

    Age Limit:

    Age must be between 21 to 30 years. Age relaxation is available for reserved category candidates.

    SC/ST : 5 years

    OBC : 3 years

    Selection Procedure:

    Selection is based on the performance in the written exam and interview.

    You must have good preparation of your stream because the questions will be related to your field of study.

+ Reply to Thread

Similar Threads

  1. Cutoff of IES (Conventional) exam for getting promoted to interview round.
    By Unregistered in forum UPSC Exams Discussions
    Replies: 0
    Last Post: 18-08-2013, 07:41 PM
  2. Expected cutoff for OC candidates in IES exam this year?
    By Unregistered in forum UPSC Exams Discussions
    Replies: 2
    Last Post: 18-08-2013, 12:16 AM
  3. What is the general cutoff (Marks) to clear IES written exam?
    By Unregistered in forum UPSC Exams Discussions
    Replies: 0
    Last Post: 09-07-2013, 08:31 PM
  4. Replies: 1
    Last Post: 29-03-2013, 06:43 PM
  5. What was 2011s cutoff mark for CE in UPSC IES exam?
    By Unregistered in forum UPSC Exams Discussions
    Replies: 2
    Last Post: 25-09-2012, 02:19 PM