Reply to Thread

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

Hi friends,
the eligebel for writing civil services exam is -
you should be a graduate and those who are in their final year of graduation can also apply,but by the time exam results are out you should get your all original certificates with you.

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

Originally Posted by Unregistered

having completed Diplma mechanicle engneering, can i apply for civil services exam now.

HI,

No it's Not Possible You are not eligible for Civil services Only after completing your Diploma in Mechanical Engineering course.

Civil Service Examination is Conducted by Union Public Service and Civil Service Conducts Many Examination like IAS/IPS/IES Etf..

The Civil Service Examination is divided into three stages namely , Preliminary Examination /Main examination and Interview .

The Minimum Educational Qualification to apply for this Civil Service Examination is that the candidate should Complete graduation in any discipline from
recognized University .

You have Complete Only Diploma Course . So your Not eligible to apply for Civil Servie .

Suggestion :-

If your Interested to apply for Civil Service Examination, than I suggest you to apply for B.E/B.Tech After Completing Diploma course in Mechanical Engineering , than Only
your eilgible for Civil Service Examination .

Hope you Understand

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

Hi,No you are not eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering coz as far as UPSC exam is concern without bachelor degree you can not apply for this exam diploma is not sufficient for eligibility criteria ELEGIBLETY CRITERIA:-Educational QualificationThe candidate must hold any degree in any discipline from any recognized universityFinal year degree students are also eligibleDegree obtained by distance education/open university is also eligible if the university is a recognized universityAge limitGeneral 21-30 yrsSC/ST 21-35 yrsPH 21-40 yrsNumber of attempts permittedGeneral 4OBC 7PH 7SC/ST No LimitNationality should be IndianGood luck......

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

Hello,
Sorry friend but you are not eligible for Civil Services Examination after completing diploma in Mechanical Engineering since the minimum requirement is graduation and diploma is not considered as a graduate course, So you can do graduation and then you can apply for Civil Services Examination.

The basic eligibility criteria for Civil Services Exam are as follows:
Educational Qualification
The candidate must hold any degree in any discipline from any recognized university
Final year degree students are also eligible
Degree obtained by distance education/open university is also eligible if the university is a recognized university
Age limit
General 21-30 yrs
SC/ST 21-35 yrs
PH 21-40 yrs

Number of attempts permitted
General 4
OBC 7
PH 7
SC/ST No Limit

Nationality should be Indian.

For further details refer the pdf attached below and for Previous Years Question Papers you can refer www.upsc.gov.in
You can fill the online application form from the official website www.upsconline.nic.in

Regards...

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

Originally Posted by Unregistered

having completed Diplma mechanicle engneering, can i apply for civil services exam now.

Hello,No you are not eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering because you can't apply for UPSC exam without bachelor degree. diploma is not sufficient foreligibility criteria.Eligibility:The candidate must be a citizen of India.The candidate must have a age limit of 21-30 years.The candidate must have got a Engineering degree from a recognized university and thecandidates must have passed out from departmentsCivil,Mechanical, Electrical & Electronics Engineering.The candidates who are writing their final degree exam can also apply for the exam.The pattern for the exam is:Written testPersonality TestThe written test consists of 5 papersthanksGood Luck...

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

the eligibilty for writting civilservices exam is you shoud be a graduate and those who are in their final year of graduation can also apply,but by the time exam results are out you should get your all certificates with you.

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

No after completion of your Diploma in Mehanical Engg you are not eligible for Civil Service exam...

Eligibility for UPSC:

You have to complete the graduation from any recognized university.

And your age should in between 21-30 years.

So after completion of your graduation only you can go for UPSC........

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

Dear Aspirant1

Sorry, being completed Diploma in Mechanical Engineering you are not eligible to apply for Civil services.
Because,Graduation in any steam is the minimum educational qualification to apply.
You have diploma means 10+3 = 13 years only but required minimum required 15 years of academic qualification.
so, better to complete Graduation either in engineering or any degree to get eligibility for civil services.

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

HELLO SIR........

you are not eligible for applying in civil service because for UPSC exams
the minimum education qualification required is graduation from a recognized institute.
so no you are not eligible wel if you want to apply than firstly
you have to do engineering and than you can apply

ALL THE BEST..........

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

diploma is not a Bachelor degree so you cannot apply for Civil services exam .

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

Originally Posted by Unregistered

having completed Diplma mechanicle engneering, can i apply for civil services exam now.

No,you cannot apply for the Civil Services by only completing Diploma in Mechanical Engineering.

The reason behind is that as per the education qualification framed for the Exam to join in Civil Services states that the candidate appearing for the exam must have completed a degree and it can be from any discipline but should have a fair percentage.Even Final year candidate is eligible for applying for the exam.

Apart from the education qualification,there are certain other standards and they are:

The candidate should be a citizen of India.

The age limit needed for the exam is that the candidate must have 21-30 years of age

There are certain upper age relxation which are allowed for the candidates of other category.


If you satisfy them all then you can apply for the exam

For more info check at ​www.upsc.gov.in

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

Friend, you are not eligible for Civil Service Examination. Because diploma holders are not permitted to appear for civil service examination. For civil service examination, only graduation or in final year of graduation are allowed to appear for civil service examination. Important facts about civil service examination are:* Nationality: Indian* Educational Qualification: Any bachelor degree* Age limit: 21-30 years However, there is age relaxation in upper age for reserved categories.For further information or any query, please visit www.upscdiscussions.com http://upsc.gov.inWISH YOUR BRIGHT FUTURE

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

Hello dear,
Diploma is not valid for UPSC exam there are required graduation degree in any discipline.
diploma is not degree if your course is equivalent the graduation degree than you can apply.

Eligibility Criteria:-
Education qualification-
Graduation in any stream from Govt. recognized University(NO restriction of %)
Final year student who appeared in last year exam can also apply for UPSC prelims exam.
Age limit-
GEN- 21 to 30 year
OBC- 21 to 33 year
SC/ST- 21 to 35 year
Nationality-
Indian
Attepts-
Gen- 4
OBC- 7
SC/ST- Unlimited

For more detail you can visit website www.upsc.gov.in

All the best

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

Yes there are some conditions to apply for UPSC civil services exams for those candidates who gets admission in diploma after their 12th class so the conditions are following for diploma aspirants :

1. The candidate must have passed 12th standard or 12th class by 10+2 system before diploma

2. Candidate must get admission in diploma at the time of admissions in university/institute/board

3. Diploma should be of minimum 3 years durations means the 1 year or 2 years diploma candidates would not be eligible to apply for UPSC Civil services exams

4. Candidate must have completed their diploma from a recognized university or institute

5. Candidate must have secured at least 50% marks in his/her diploma

6. The diploma course should be done in regular conditions means private would not be eligible.

If you have completed your diploma as per above mentioned guidelines then you are eligible but if you are not containing your diploma according to above mentioned circumstances then you are not eligible.

All the best

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

No dear, You are not eligible for the exam because for the civil service exam qualification is required candidate must have completed the graduation in any stream from the approved university.
For the civil service exam firstly you complete the degree in any stream from the approved university then you are eligible for the exam. The age limit for the exam is the 21 to 30 years for the unreserved category The age relaxation is for the reserved category. The attempt of the exam is the 4 times. 7 times for the obc category No limit till age for the sc/st category. For more information please update with the www.upsc.gov.in Best of luck

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

Dear friend,

No, you are not eligible for civil service exam.

Requirements-

Candidate must be passed or can apply when in last year of his/her graduation.

Age Limit- For general 21-30,For OBC 21-33,For SC/ST 21-35
3 year age relaxation for OBC candidate and 5 year age relaxation for SC/ST candidate.

Candidate must be Indian civilization.

Good Luck..............

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

For the Civil Service exams,
The minimum educational qualification is being a graduate or holding an equivalent degree from a university approved by the UGC or else being a final year student in the same.
So you being a diploma holder under the mechanical engineering stream won't help.
You are not eligible for The Civil Service exams conducted by the UPSC.

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

Sorry,dear you are not eligible for Civil Service Exam

For this examination candidate must be graduate or B.Tech , BBA etc .

You diploma is not equal Graduate.

Therefore you can not apply for this exam

Best of Lcuk

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

Hello Dear,

Sorry dear you are not eligible For CSAT exam because you are a diploma holder but you can appear IES exam.

Eligibility Criteria for CSAT

should be graduate from a recognized university in any stream
(marks or percentage doesn't matter)

age should be 21 to 30 years
age relaxation for OBC candidate 3 years
age relaxation for SC/ST candidate 5 years

Eligibility Criteria for IES

Should be completed degree or diploma in engineering & technology for following branch
Mechanical
Civil Engineering
Electrical Engineering
Electronics & Telecommunication Engineering

Age of the candidate should be 21 to 30 year.

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

hello,


for civil service exam you must be passed graduate but you not so you can,t apply for civil service exam.

so sorry dear you should have to passed graduate in any stream from the recognized university then you can apply.


age must be 21 to 30 years for civil service exam.



all the best

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

dear friend,,

there are no any examination for diploma holders conducted by upsc ,

and the minimum educational qualification required for upsc civil services examination is graduation , and the university must be a govt recognized ,


see the other details about the examination i share here for you.

first of all talking about the eligibility criteria.

there are no any special requirement ,

only two requirements needed.

1. the candidate must be the citizen of India.

2. the candidate should have a graduation degree minimum .

Age criteria:-

@* for general category:- 21-33 years.

@* for obc category:- 21-33 years.

@* for sc/st category:- 21-35 years.

Attempts restriction:-

@ for general category:- only 4 attempts

@ for obc category:- 7 attempts.

@ for sc/st category:- no any limit.




so my friend you are not eligible because you are not a graduate .

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

For Civil services examination Conducted by UPSC minimum qualification stated for it is graduation in any stream or in any degree equivalent to that, but from an recognised university only. Since you have completed Diploma in Mechanical Engineering, which can not be considered equivalent to the graduation, hence you are not eligible to appear in this examination. However once you complete your graduation, then definately you can appear in this exam provided your age must be between 21 years to 30 years.

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

hey


sorry friend but you can,t apply for civil service exam because for civil service exam you should be passed graduate.


let see


ELIGIBILITY CRITERIA:-

you must be passed graduate in any stream from the recognized university.

you must be indian.

age should be 21 to 30 years.

age relaxation for only reserved category.



according this you can,t because you are not a graduate person.


best wishes

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

sorry frined..........you cant apply for civil service exam.
the minimum qualification for civil service exam is the person must be graduate
you can check the below eligibilities for upsc exam;-
educational qualification;-the person must be graduate
nationality;-indian
age limits;-
general-21 to 30 years
obc-21 to 33 years
sc/st-21 to 35 years
physical handicaped students-21 to 40 years
ex service man-21 to 35 years

there is no reservations in upsc exam.

for more details you can visit the below link


www.upsc.gov.in

thank you

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

HELLO DEAR,


SORRY MY DEAR FRIEND YOU ARE NOT ELIGIBLE FOR IAS EXAM
AS UPSC DONOT ENTERTAIN DIPLOMA HOLDER'S..

upsc exams are based on some qualifications,



AGE LIMITS,..

GENERAL>>>21 to 30 yrs
OBC>>>21 to 33 yrs
SC/ST>>>21 to 35 yrs



EDUCATIONAL QUALIFICATION...

A passed graduation degree from any RECOGNIZED UNIVERSITY.....




GOOD LUCK

HAPPY TO HELP YOU

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

Dear civil service examination is conducted by upse twice a year.

To do cse a graduate is needed to sit for the exam even a final year candidate also permitted .

Candidate should have graduation from a recognized university.

A gen.candates age must be within 21 to 30 years,obc 3 years more and s/c,s/t,5 years more allowed.

Candidate nust be the citizen of india.

According to question you are a diploma mechanical engineer not graduate so above points for you,if you have the intention you can complete b.e. Your graduation then you can appear for cse of upsc.

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

The minimum educational qualification is being a graduate or holding an equivalent degree from a university approved by the UGC or else being a final year student in the same.
So you being a diploma holder under the mechanical engineering stream won't help.
You are not eligible for The Civil Service exams conducted by the UPSC.

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

The minimum instructional qualification is being a graduate or holding constant degree from a university approved by the UGC as an alternative being a final year student within the same.
therefore you being a sheepskin holder underneath the applied science stream will not facilitate.
you're not eligible for The government officials exams conducted by the UPSC.
yes expensive you're eligible for upsc examination once finishing applied science , infect you'll be able to vie IES that represent Indian Engineering Service .
IES examination is conducted by UPSC(Union Public Service Commission) and also the examination is control once a year for recruiting candidates for the India's government Engineering Organizations.

The candidates WHO square measure wanting for stable government job in engineering cadre then you'll be able to apply for this examination.

The examination is conducted once in a very year and also the examination is conducted on the month of June and also the notification are going to be discharged within the month of Gregorian calendar month.

No, you're not eligible for UPSC Civil services once finishing your sheepskin in applied science course. to use for this examination you have got to finish your Graduation degree course from a recognised University. Final year showing candidates are eligible for Civil services examination.

This examination is Conducted once a year by UPSC, and also the notification are going to be revealed once a year within the employment newspaper or within the UPSC web site. The Civil Services Examination is conducted once a year by the Union Public Service Commission for achievement to varied services just like the Indian body Service, Indian agency and Indian Police Service, yet as blood group and blood type Central Services.

So, please complete your Graduation initial and so apply for Civil services examination.

The Notification of this examination are going to be revealed within the month of February once a year and eligible candidates might fill the applying type on-line solely. you should have earned the age of twenty one years and must not have earned the age of thirty years, the higher regulation are going to be relaxation by five years for SC/ST candidates, by three years for candidates of OBC.

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

The minimum eligibility for Civil services is you must complete your graduation from any recognized university.

And your age should in between 21-30 years.

So you can go for Civil services examination...........

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

Dear friend,

Iam sorry to say you are not eligible to write the civil services exam.

the notification issued by the upsc with respect to the civil services tells the following clause:
the candidate must hold a degree of any ofuniversities incorporated by an act of the central or state legislatures ofindia or declared to be deemed as university under section 3 of the UGC act1956.

so it is mandatory to have a degree in hand to apply for civil services.

so i would suggest you to complete B.E in mechanical engg to become eligible for applying

you can directly join second year in B.E mechanical

all the best

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

dear friend,
i am very sorry to say that you are not eligible

you can not apply with diploma ,

because diploma holders are not eligible for the same .

look dear,
according to the notification for the examination of civil services the minimum required educational qualification is graduation from a govt recognized university .


see the other qualifications also .

eligibility criteria:-

1. you must be an indian citizen.

2. you must be a graduate from a govt. recognized university.

age criteria:-

1. general category:- 21-30 years.
2. obc category:- 21-33 years.
3. sc/st category:- 21-35 years.



so sorry for that you are not eligible,

and also there is no any examination for diploma holders in upsc

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

Dear aspirant ,


first of all i inform you that all diploma holders are not eligible for

civil service exam . So you can't apply for civil service exam . For being eligible for upsc

civil service exam want to be graduate if complete your graduation so you can surly

apply for this exam .


Not only graduation you have also other qualification for giving this exam


age limit



21-30 year for gen

21-33 year for obc

21-35 year for st/sc ex-service man

21-40 year for physical handicapped

attempts



4 gen

7 obc

unlimited st/sc

nationality



indian

sex



male & female

education



graduate with ugc approved university

final year candidate can also apply


good luck .................................................

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

first of all i want to tell you that diploma holders are not eligible to apply for upsc CIVIL SERVICES EXAM.

so if you are willing to apply for upsc civil services exam then you can't do that!!!!!
for being eligible for upsc civil services exam you need to be a graduate in any stream from a recognized institute under ugc.

eligibility to apply for upsc civil services exam is
Graduation or engineering from a recognized university under UGC.
age limit is 21 to 30 years.

age relaxation for OBC and SC/ST of 3 and 5 years respectively

final year appearing students are also eligible.

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

yes u can apply for upsc as u are a graduate
u can even apply for different examinations conducted by upsc like:
NDA
CDA
NAVAL
SCRA
ESE
IES
IAS
IFS
CPF

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

hello friend,
I am sorry to say you that you are not eligible for this exam.

As the minimum qualification is given below.

EDUCATIONAL QUALIFICATION:

You must have a degree from a recognized university or you must be a graduate.

AGE LIMIT:

minimum 21 years
maximum 30 years

For SC/ST the age limit ranges from 21 to 35
For OBC candidates the age limit ranges from 21 to 33 years.

NUMBER OF ATTEMPTS:
general----4
SC/ST------no limit
OBC--------7

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

Sorry,to say you are not eligible for Civil service examination after completing Diploma in Mechanical engineering because you have to complete first graduation degree then apply for Civil service examination.

There are total four attempts for General caste candidates in this examination but some relaxation for OBC and SC/ST caste candidates and attempt is 7 for OBC and no limitation for SC/ST caste candidates.

For more information please refer to following website :

http://www.upsc.gov.in/



------------------------------------------------------------------------------------------------------------------------------------------------------------------

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

No, you are not eligible to apply for Civil Service examination because diploma is not equal graduation . Any stream candidate can apply for Civil Service examination but it is equivalent to graduation . Minimum Qualification is applying for this examination is graduate degree from a recognized University or equivalent qualification .

Civil Service Examination is conducted by Union Public Service Commission One time in a year . Civil Service Examination is divided into various stages . The stage are Preliminary , Main as well as Personnel Interview . This year notification was already published in the official website as well as employment news papers and leading news papers also . Civil Service Examination is conducted for Administrative Service , Police Service , Foreign Service , Defence Service ... ...... etc .

So,first complete your graduate degree and then apply for this examination .

The age should be between 21 years and 30 years as on 1st august of year of examination . Upper age limits is applicable for SC/ST/OBC/PH/Ex-Servicemen candidates .

Attempts of Civil Service examination :-

General candidates :- 4 attempts , OBC candidates :- 7 attempts , No limits for SC/ST candidates .

For further details , Visit the official website :- http://www.upsc.gov.in

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

Dear, sorry, you are not eligible for Civil Service, as a Diploma in Mechanical Engineering. Because the minimum qualification is Graduation in any recognized University. After completing B. Tech, You can appear for it. If you wish to apply Indian Engineering Service, then You can also appear for it, but after B. Tech..

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

The minimum requirement to appear for the civil services examination is to be a graduate from a recognized university.So I am afraid your qualification won't be enough according to the eligibility criteria mentioned in upsc.Still you can look out for other exams.Please visit http://upsc.gov.in to know more.Good Luck!

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

No, You are not eligible for UPSC Civil services after completing your Diploma in Mechanical Engineering course. To apply for this examination you have to complete your Graduation degree course from a recognised University. Final year appearing candidates are also eligible for Civil services examination.

This examination is Conducted every year by UPSC, and the notification will be published every year in the employment newspaper or in the UPSC Website. The Civil Services Examination is conducted every year by the Union Public Service Commission for recruitment to various services like the Indian Administrative Service, Indian Foreign Service and Indian Police Service, as well as Group A and Group B Central Services.

So, please complete your Graduation first and then apply for Civil services examination.

The Notification of this examination will be Published in the month of February every year and eligible candidates may fill the application form Online Only. You must have attained the age of 21 years and must not have attained the age of 30 years, the upper age limit will be relaxable by 5 years for SC/ST candidates, by 3 years for candidates of OBC.

Number of Attempts :

~~ 4 attempts for open, 7 for OBCs and no limit for SCs/STs. If a person appears in the Preliminary Examination or even one paper is counted as an attempt.

The examination is Conducted in 2 stages :

~~ Preliminary Examination
~~ Main examination

You have to cracked the Preliminary examination first, only then you are eligible to appeared for Main examination. preliminary examination is Objective and there are 2 papers in this examination.

But in Main examination there are 9 papers and you have to choose the subjects in main examination on the basis of Graduation. The Question Papers III to IX will be set both in Hindi and English.

So, please complete your Graduation first and then apply for UPSC Civil services examination and if you need more information about this examination then please check official website of UPSC.

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

No you are not eligible dear.

ELIGIBILITY:-

Educational qualification:-

If you want to appear in IAS exam minimum eligibility is a degree from

recognized university or You must be a graduate.
Final year student, who are doing the graduation can also apply for the exam.

Age limit:

you must have attained the age of 21 years not be over 30 years of age as on 1st August.
But for OBC/SC/ST candidates relaxation of age limit is there.
For OBC-3 years relaxation, so age limit is 21-33 years.
For SC/ST-5 years relaxation, so age limit is 21-35 years.

Citizenship:-

You must be Indian.

Number attempts:-

General category candidates can appear 4 times only,
OBC can appear 7 times
SC & ST candidate have no limit for appearing in the exam.

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

Dear,

For the Civil Service exams,
The minimum educational qualification is being a graduate or holding an equivalent degree from a university approved by the UGC or else being a final year student in the same.
So you being a diploma holder under the mechanical engineering stream won't help.
You are not eligible for The Civil Service exams conducted by the UPSC.

best of luck

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

yes dear you are eligible for upsc exam after completing mechanical engineering , infect you can try for IES which stand for Indian Engineering Service .
IES exam is conducted by UPSC(Union Public Service Commission) and the exam is held every year for recruiting candidates for the India's government Engineering Organizations.

The candidates who are wanting for stable government job in engineering cadre then you can apply for this exam.

The exam is conducted once in a year and the exam is conducted on the month of June and the notification will be released in the month of January.

The candidates who are willing to apply for the exam must satisfy some eligibility criteria:

Eligibility:
The candidate must be a citizen of India.
The candidate must have a age limit of 21-30 years.
The candidate must have got a Engineering degree from a recognized university and the candidates must have passed out from departments
Civil,Mechanical, Electrical & Electronics Engineering.
The candidates who are writing their final degree exam can also apply for the exam.

The pattern for the exam is:

Written test
Personality Test

The written test consists of 5 papers

thanks
regard
pooja dwivedi

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

no only degree or graduation degree holders can apply for civil services.

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

no dear you are not eligible for applying in civil service because for UPSC exams the minimum education qualification required is graduation from a recognized institute. so no you are not eligible ,wel if you want to apply than firstly you have to do engineering and than you can apply...

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

For the Civil Service exams,
The minimum educational qualification is being a graduate or holding an equivalent degree from a university approved by the UGC or else being a final year student in the same.
So you being a diploma holder under the mechanical engineering stream won't help.
You are not eligible for The Civil Service exams conducted by the UPSC.

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

No, you can't apply for UPSC exam without bachelor degree. diploma is not sufficient for eligibility criteria.

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

the eligibilty for writting civilservices exam is you shoud be a graduate and those who are in their final year of graduation can also apply,but by the time exam results are out you should get your all certificates with you (originals).

yes,surely u can apply for it.....all the best dude

Re: Am I eligible to Apply for Civil Services exam after completing diploma in Mechanical Engineering?

No.
Minimum educational qualification is graduation.