Can I apply for engineering services exam being a diploma holder in mechanical engineering stream?

sir/madam..I'm a diploma in mechanical engineering..I just want to apply for upsc engineering services..and am 20years old...to your note,I have completed my 12 th standard before my diploma studies...am I eligible?

Related UPSC Questions:

• Can a diploma holder apply for engineering services exam or not?
• Give complete details of AMIE Examination and Course Structure?
• Can a computer engineering diploma holder apply for UPSC and MPSC exams?
• Am I eligible for Combined Defence Services (OTA) after completing Diploma in Mechanical Engineering?
• Can I attend UPSC SCRA exam after completing diploma in Mechanical Engineering with 90%?
• Which graduation course will allow me to be more successful in UPSC exams?
• Am I eligible for SCRA exam being a diploma holder in Mechanical engineering with 68.48% marks?
• Can I apply for UPSC Engineering Services Exam which is scheduled to be held on 28th June this year being a diploma student (mechanical engineering)? Am I eligible for it or not?
• Can I write IAS exam after completing 3 yr diploma in mechanical engineering?
• Is there any Job for a Mechanical Diploma Holder under UPSC? Provide details

Eligibility Criteria To Apply for IES - Indian Engineering Services Exam 2013 :

Candidate should have a bachelor's degree in engineering stream in any one of the following disciplines :

Civil Engineering
Electrical Engineering
Electronics & Telecommunication Engineering
Mechanical Engineering

Age should not be less than 21 years and more than 30 years and relaxation in upper age would be provided only to reserved category candidates as per government guidelines which is 5 years for SC/ST, 3 years for OBC, 10 years for PWD and 5 years for Ex-Servicemen category candidates

Dear you have completed a diploma in mechanical engineering after class 12th which does not make your eligible to apply for UPSC IES examination and the another things is that you are only 20 years old so that both eligibilities does not match with the required eligibility criteria so that you are 100% ineligible to apply for this exam and after completing 21 years of age also you can not apply because your educational qualification does not match with the required degree so dear you should go to complete either - BE or B.Tech in any one of the above mentioned streams then apply for this exam and on the basis of your diploma you can not apply for any exam which is conducted by UPSC Board.

Other opportunities for you to make your career in central government departments :

1. SSC - Junior Engineering Exam 2013 :

Candidate should have passed in class 10th with very good academic record and candidate must posses a diploma in either - civil engineering or mechanical engineering from a recognized university/institute

Age should not be less than 18 years and more than 27 years and relaxation in upper age as per government guidelines which is mentioned above

Dear if you prepare for GATE Entrance exam and qualify this then you may also get the chance go get job in - BHEL/NTPC/IOCL/ONGC/Etc.

All the best

hi,
i am sorry to say that, you are not eligible for engineering services exam.

IES exam stands for Indian Engineering Services.

IES exam is condudted by UPSC.

IES EXAM ELIGIBILITY;-

1-you must be passed a bachelor degree from a recognized ubiversity in the following branch;-

----civil

---mechnical

---elcetrical

--electronics and tele comunation


2-age limit is 21-30 years.

for obc

21-33 years.

for sc/st
age limit is 21-35 years.

-----you must be Indian citizen.

for more,
http://upsc.gov.in

Hello Friend;

Sorry you are not eligible for UPSC engineering services exam because minimum qualification for that is graduate degree but you have diploma. And another thing is your age because you are in 20 year but for this exam candidate should have 21 years of age.

Thanks
Yeshgaur

Dear Aspirant!
You are not eligible to apply for Indian Engineering Services (I.E.S) examination conducted by UPSC.
Because , you are a diploma holder it is the only basic intermediate livel or 10+3 level even though you ahve completed 12th class.
But required qualification to apply for IES examination is Bachelor' degree in engineering.
So, better to complete Graduation in Mechanical engineering after getting the Degree certificate only you are eligible.
But also you are having age is 20 years only.
To apply for UPSC IES examination, minimum required age is 21 years old and above...

Good luck

Hello,
Sorry friend but you are not eligible for Engineering Services Examination after completing diploma in Mechanical Engineering since the minimum requirement is graduation and diploma is not considered as a graduate course, So you can do graduation and then you can apply for Engineering Services Examination.
You just need to satisfy the basic eligibility criteria to appear for the IES Exam.

The eligibility criteria for IES exam are as follows:
The candidate should have degree in engineering from university recognized by UGC.
The candidate should be Indian
The age limit is 21-30 yrs
The maximum number of attempts for General category is 4

For further details refer the pdf attached below and for Previous Years Question Papers you can refer www.upsc.gov.in
You can fill the online application form from the official website www.upsconline.nic.in

Regards...

Re: Can I apply for engineering services exam being a diploma holder in mechanical engineering stream?

hi friends,

I am sorry to say that you are not eligible for engineering services exam.

IES exam stands for Indian Engineering Services.

IES exam is condudted by UPSC.

IES EXAM ELIGIBILITY;-

1-you must be passed a bachelor degree from a recognized ubiversity in the following branch;-

A----civil B---Mechanical C---electrical D--electronics and tele comunati


2-age limit is 21-30 years. for general

for obc 21-33 years.

for sc/st age limit is 21-35 years.

-----you must be Indian citizen.

for more details visit-http://upsc.gov.in

Hello

You are not eligible for the IES(Indian Engineering Exam).The educational qualification required is a engineering degree in any stream.
After class 10, you become eligible for diploma,then you become eligible for the B.TECH course(3 year course).
After class 10 you become eligible for 10+2,then you become eligible for B.TECH course(4 years course).

Means both the 10+2 and diploma are equivalent to each other and has the same importance,then why did you did the same course again,you wasted your time and precious years,both the 10+2 and diploma are equivalent to each other and has the same importance,it was a waste of time.

Now as you still do not have the engineering degree,you are not applicable for the IES.

For more details visit the website of the UPSC.
www.upsc.gov.in

hi,

No, You can not Appear for Engineering Service Exam.

>>The minimum education qualification required for IES is Graduation Degree in any of Engineering branch.

>> And age limit is 21-30 years.

>> Candidate must be citizen of India.

>> Final year candidate can also appear for IES exam.

>> but you have done Diploma, So you can not Appear in IES Exam.

I hope you will understand.

All the Best

hi,

i like your passion ..

>> but diploma holder cannot apply for any UPSC related exam ..

>> here is some requirement for upsc:

>> you must have graduation from any recognized university.

>> this diplom is not counted by upsc


>> age limit is between 21 to 30 for open catagories.

>> you must be indian citizen

>> i hope you got me

>> all the best

No diploma holders are not eligible to give Indian Engineering Services exam.

To give this exam, one should have a degree in any one of the following streams.

Civil Engineering

Electrical Engineering

Electronics & Telecommunication Engineering

Mechanical Engineering

Candidate must have attained 21 years of age and must not have attained 30 years of age for general category.

There is Upper age relaxation as follows as per the government norms.

The minimum age is 21 years and maximum is 33 years for OBC Category.

The minimum age is 21 years and maximum is 35 years for SC/ST Category.

The minimum age is 21 years and maximum is 40 years for PWD Category.

So, as per the eligibility conditions, if you complete your B.Tech degree in Mechanical Engineering after your Diploma, you can apply for this exam.

hi
I�m sorry but you cannot apply for the engineering services exam conducted by the upsc because currently you are a diploma holder whereas to give the IES exam, you need to be a graduate from mechanical, civil, electrical or electronics engineering. You have the branch mechanical, that is fine but a graduation degree is also a must